Now send products to Multiple Addresses in one go.
Book Deep Cleaning Service

Priority Consumer Care – 1800 572 1800


Philips Home Safety

Introducing Philips Home Safety Range


App Features



To use your Philips Home Safety Camera, the OS of your smartphone should be compatible with the app. The Philips Home Safety app will work on your smartphone as long as it runs either IOS version 15.0 and higher or Android 8 and higher.

Yes, the Philips Home Safety Camera should work with an extender, as long as the network to which the range extender is connected, is a 2.4 GHz network.

The process of pairing your Philips Home Security Cameras should approximately take 2-3 minutes.

Minimum requirements:

  • Indoor 1000 series: 1.2Mbps, 2.4 GHz
  • Indoor 3000 series: 1.5Mbps, 2.4 GHz
  • Outdoor 3000 series: 1.2Mbps, 2.4 GHz

The Philips Home Safety Camera support SD cards with a maximum capacity of 128GB.

Philips is proud to be a household brand trusted by millions. We take that trust very seriously and follow strict industry standards to ensure your data stays private and in your control. Some of the ways we do so include:
1. Our installed private cloud is ISO27001 compliant.
2. Encrypting the SD card by default so it cannot be read if someone removes it from the device.
3. We encrypt data at rest so it is accessible only to you.
4. TLS 1.2 is used for any data transmission; depending on your router settings AES 128 is supported (AES 128 is the same encryption used by banks).
5. Biometric authentication to access the app if wished

You can access your Philips Home Safety Camera from anywhere, as long as you have internet access. In case you want to use your camera in your new location, unpair it from the app and pair it again with the new WiFi details.

Your Philips Home Safety Camera does not contain a battery and will turn off in case of a power failure. However, as soon as the power comes back, the camera will reconnect and resume recording.

Yes, you can both share access to your Philips Home Safety Camera with up to 20 users and access the app on multiple devices. You can add users to your home through the Home Safety app and allow them to access your cameras. Follow the steps below to begin:

  • Go to ‘’Profile’’
  • Tap ‘’Home management’’
  • Select the home you want to share
  • Go to ‘’sharing settings’’
  • Tap ‘’Invite users to home’’
  • Fill out the name and email address of the person you want to share access with.
  • Tap ‘’Share invitation’’ and share the invite how you would like.

  • Note: while those who receive the invite can create a Philips Home Safety account at that point, please ensure they use the same email address as the one in the invitation. The link in the invitation expires in 15 minutes.


    Log into the same account on multiple devices To access your cameras on multiple devices, simply install the Philips Home Safety app on the device you want and log into the same account.