Philips Air Purifier with HEPA filter 99.97% particle removal - AC3059/65
AC3059/65
With just one push of a button, the air purifier filters the invisible viruses, allergens or pollutants in your home, to keep it clean and safe. It purifies quickly and effectively, thanks to its clean air delivery rate (CADR) of 520 m³/h.
Air quality display
Auto-ambient light
Low Energy Consumption
Particle removal
Quality
Track and control with app
Ultra-quiet operation
Virus removal
Save Extra with 2 offers:
- Additional 1 Year Warranty - 2+1* year additional warranty coverage exclusively for products puchased from this website | Check Warranty Policy
- Buy Now, Pay Later- Easy EMI options let you have what you desire the most | Details on Checkout
₹ 29,995.00
- ₹ 35,995.00 (17% Off) Inclusive of all Taxes
Philips Air Purifier with HEPA filter 99.97% particle removal - AC3059/65
₹ 29,995.00
- ₹ 35,995.00 (17% Off)
Certified disinfector:
This product has gained the official certification from China government as a disinfector, with authoritatively endorsed disinfecting technology and results.
HEPA filter captures 99.97% of particles of 0.003 microns
3-layer filtration with NanoProtect HEPA, active carbon filter and pre-filter captures 99.97% of ultra-fine particles as small as 0.003 microns (4), so you are safe from PM2.5, bacteria, and other pollutants (7).
Removes up to 99.9% of viruses and aerosols from the air
Captures aerosols including those which may contain respiratory viruses. Tested independently by airmid health-group to remove up to 99.9% of viruses and aerosols from the air (3). Also tested for coronavirus (5).
Air quality display
See the real-time air quality in your home at a glance. The display shows the level of allergens, gases and PM2.5 in numerical form, as well as with an intuitive color ring.
Thoroughly tested for quality you can trust
Philips purifiers go through 170 mandatory and strict inspection tests before releasing from factory. They are subjected to rigorous life and durability tests, for continuous operation 24/7.
Auto-ambient lighting
The display light automatically adjusts according to the environment in your room, giving you all the benefits without any of the disturbance.
Sleep mode with ultra-quiet operation
In Sleep mode, display lights are dimmed, and the purifier operates in near silence for clean air while you sleep. Certified by Quiet Mark.
Overall Rating
3 reviews
0%recommend this product
Reviews
Specifications
-
Connectivity
- App connects via Wi-Fi:
-
Clean Home+
- Smartphone compatibility:
-
iPhone and Android devices
- Voice control:
-
Alexa, Google Home (7)
-
Filteration Type
- HEPA
-
Yes
- Carbon
-
Yes
- Pre-Filter
-
Yes
- Ioniser
-
No
- UV
-
No
- Anti-Bacterial
-
No
-
Indication Type
- Allergen
-
Yes
- Gas
-
Yes
- PM2.5
-
Yes
- Temperature
-
No
-
Maintenance
- Recommended filters change
-
3 years (6)
- Replacement filter:
-
FY3430/30
-
Modes
- Auto
-
Yes
- Turbo
-
Yes
- Sleep
-
Yes
- Allergen
-
Yes
- Bacteria and Virus
-
Yes
-
Performance
- CADR (Particle, GB/T):
-
520 m³/h
- Filtration:
-
HEPA, Active Carbon, Prefilter
- Room size (G/BT):
-
62
- Air quality sensor(s):
-
PM2.5 particle, Gas
- Particle filtration :
-
99.97% at 0.003 microns
- Allergens filtration:
-
99.99%
- Virus & aerosol filtration:
-
99.9%
-
Usability
- Min. sound level (Sleep mode):
-
15 dB
- Automatic mode:
-
Yes
- Cord length:
-
1.8 m
- Sleep mode:
-
Yes
- Manual speed settings:
-
4 (Sleep, Speed 1, 2, Turbo)
- Air quality feedback:
-
Color ring, numerical
- Auto-ambient light:
-
Yes
- Max. sound level (Turbo mode):
-
56dB (9) Day modes :
- Night modes:
-
2 (Sleep, Allergy Sleep)
-
Weight & Dimension
- Weight of product:
-
7.2 kg
- Dimension of product (LxWxH):
-
310x310x718
- Dimension of packaging (LxWxH):
-
370x366x784 mm
-
General Specifications
- CADR
-
520 cmh
- Room Size
-
62 sqm/667 sqft
- App Control
-
Yes
- Remote
-
No
- Noise Level
-
15-56 dB
- Filter Life Indicator
-
Yes
- Applicable Filter
-
FY3430/10
-
Technical Specifications
- Voltage:
-
220 V
- Frequency:
-
50 Hz
- Cord length:
-
1.8 m
- Power:
-
58 W
-
Design
- Color(s):
-
White,Silver
- Color of control panel:
-
Black
- Control panel type:
-
Touch
- Material of main body:
-
Plastic
- Material of deco ring:
-
Plastic
-
Energy Efficiency
- Max. power consumption:
-
58 W
- Stand-by power consumption:
-
2 W
- Voltage:
-
230 V
-
Service
- Guarantee
-
2-year worldwide guarantee
-
Sustainability
- Packaging:
-
> 90% recycled materials
- User Manual:
-
100% recycled paper
- Stand By Power Consumption:
-
2 W
- Max Power Consumption
-
58 W
-
Product Details
- Product Name:
-
Air Purifier/AC3059/65
- Maximum Retail Price:
-
Rs. 34995/- (Inclusive of all taxes)
- Unit Sale Price:
-
Rs. 34995/- Per unit
- Country of origin:
-
China
- Net Quantity:
-
1 Unit
- Manufactured/Marketed by and Contact Customer Service Executive at:
-
Versuni India Home Solutions Ltd. , 3rd Floor, Tower A, DLF IT Park, 08 Block AF, Major Arterial Road, New Town (Rajarhat), Kolkata, West Bengal 700156, India.
- Email ID:
-
philipshomeliving.support.india@versuni.com
- Phone Number:
-
1800-572-1800
FAQs
Pre-filter is the filter surface of a cylindrical filter. When filter cleaning alert displays on the screen, clean the filter surface with a vacuum cleaner. When filter replacement alert displays on the screen, it’s time to replace the filter. Please check your user manual to see replacement indications specific for your model.
Note: There is no filter cleaning alert on some Philips Air Purifiers. Please follow the cleaning schedule and instructions on the user manual specific for your model.
PM2.5 is a scale for measuring real time air quality. Its values vary from 0 to 500.
The PM2.5 indication is connected to your Philips Purifier’s air quality ring light to inform you in real time about the quality of the ambient air.
The different colors indicate the following:
Blue: good.
Blue-violet: fair
Red-Purple: unhealthy
Red: very unhealthy
Your Philips Air Purifier may contain different filters depending on the model. To find out the one suitable for yours, read the article below.
Philips Air Purifier filtersYour Philips Air Purifier comes with multiple layers of filters or a cylindrical filter and warns you when a filter must be replaced. Depending on the Philips Air Purifier you have, you might see different types of filter replacement alert lights.
A) Air Purifiers AC400x, AC401x, AC402x, AC407x, AC408x, ACP073x, ACP077x, ACP007x:- Filter replacement light 1
- Filter replacement light 2
- Filter replacement light 3/4
- Filter replacement light 5
See further explanations below.
B) All other Philips Air Purifiers: Air Purifiers that do not belong to the list mentioned above, show a filter replacement indication light, icon or code (models with a display panel) to alert you.
See further explanations below.
A) Purifiers AC400x, AC401x, AC402x, AC407x, AC408x, ACP073x, ACP077x, ACP007x:When filter replacement light 1 flashes (in red): The pre-filter needs to be cleaned. You can wash it under running tap and dry it completely it before installing it back. Alternatively, you can clean it using a vacuum cleaner.
When the filter replacement light 2 is on or flashing (in red): When the filter replacement light 2 flashes or is on continuously, you need to replace the multi-care filter (for Air purifier AC4004 only). This filter cannot be washed. After replacement, make sure you reset your appliance
The filter replacement light 3/4 is on (in red): The filter 3 (activated carbon filter) and filter 4 (HEPA filter) need to be replaced. After replacing them, make sure you reset your purifier. Please note that these filters cannot be washed.
The filter replacement light 5 flashes (in red): This light indicates that the humidification filter should be replaced.
B) All other purifiersYour Philips Air Purifier may without a display screen, it has a filter replacement light and will stay on. If your Philips Purifier has a display screen, then it will show one of the following codes or icon goes on (Figure 1 in below image) to alert you:
Codes A1 to A9: Replace NanoProtect HEPA filter.
Codes C1 to C9: Replace the NanoProtect AC filter.
Code: F0: Clean the Pre-filter.
If you notice that the airflow coming from your Philips Air Purifier is weak and the air quality light does not turn blue, find out here what you can do to solve the issue.
Note: All images shown below are generic representations only; there can be some differences among specific appliances.
Packaging materials have not been fully removedIf packaging remains around the filters, then you might notice weak airflow and the air quality light might not turn blue.
To solve this, please make sure to remove all packaging materials from the filters.
The pre-filter is dirtyA dirty pre-filter (C in the picture below) can also cause the airflow from your Philips Air Purifier to be weak.
Clean the pre-filter by washing it under the tap and letting it dry (it needs to be fully dry before it goes back into your purifier).
The filters are dirtyDirty filters (marked as A and B in the picture, but some purifiers only have filter A) can cause a weak airflow as well.
These filters should be replaced once a year or as recommended for your specific air purifier model, and they should not be washed.
If your Philips Air Purifier does not remove odors or smells as expected, there can be several reasons. Please find out here how we can help you.
The room air quality is very poorIf you are using the appliance in a room in which the ambient air quality is very poor, please open the windows to improve the air circulation.
The room is too bigYour Philips Air Purifier should not be used in a room that is bigger than recommended. If this is the case, then its performance will not be optimal and some odors/smells might not be removed properly.
The recommended room size depends on your specific air purifier model. See the table below for more information or the user manual of the air purifier:
The filter has reached the end of its lifeThe lifetime of the filter is not fixed. It depends on the ambient air quality.
You can put the filter out in the sun for a couple of hours to remove the odours. If this does not help, you need to replace the filter.
If the air quality does not improve or the air quality light does not turn blue when using your Philips Air Purifier, find out the possible causes and solutions here.
Packaging material has not been removedPackaging material needs to be removed from the filters of your Philips Air Purifier. Please remove all packaging materials as shown in the below picture.
The standalone filters are not placed correctlyThe filters need to be placed in the right order and direction for your Philips Air Purifier to function correctly. Please check the numbers and then place the filter back with the tag pointing towards you.
The air quality sensor is dirty or wetThe air quality sensor in your Philips Air Purifier (indicated as figure 1 in the image below) should be dry and clean. Please check and clean it with a cotton bud if necessary.
Make sure pre-filter is cleanIf your Philips Air Purifier contains standalone filters, please wash the pre-filter under a running tap. You can use a soft brush, if it is very dirty, to brush away the dust. If your Philips Air Purifier contains a cylindrical filter, please clean the pre-filter (filter surface) with a vacuum cleaner.
You can also find step-by-step instructions specific to your model in the User Manual.
The windows are openIf the windows are open and polluted air continues coming in from outside, your purifier might not be able to improve the air quality. Please try to close all the doors/windows while operating the air purifier for at least four hours and select the highest speed mode. If PM2.5 level is more than 150, please use product in highest fan speed/turbo mode.
The room is too bigThe room in which you use the air purifier is larger than the maximum size the appliance can effectively purify. Make sure the size of the room does not exceed the maximum indicated for your air purifier model.
New furniture in the roomWhen adding new furniture to a room, the air quality might become affected by gases it might emit. These gases should disappear gradually in the next weeks.
If you wonder what the air quality lights or ring lights of your Philips Air Purifier mean, please find out here.
Note: All images shown below are generic representations only; there can be some differences among specific appliances.
Air purifiers with air quality ring lightsYou can see the quality of air your Philips Air Purifier is cleaning using the air quality lights (see image below). The different colors indicate the following:
Blue: good.
Blue-violet: fair
Red-Purple: unhealthy
Red: very unhealthy
Air purifiers with a quality lightIn this case, your air purifier indicates the current quality of the air by displaying a red or green light.
In the first few minutes after you select the SmartAir Control function, the air quality indicator will flash red to indicate that the air quality sensor is measuring the ambient air quality. After approximately 5 minutes, the air quality indicator lights up green if the air quality is good or lights up red if the air quality is poor.