Save Extra with 2 offers:
Philips Care Services
With just one push of a button, the air purifier filters the invisible viruses, allergens or pollutants in your home, to keep it clean and safe. It purifies quickly and effectively, thanks to its clean air delivery rate (CADR) of 380 m³/h.
360° airflow intake effectively covers rooms up to 45 m² and distributes clean air in every corner of the room. This boosts performance to 380 m³/hr (2) CADR (Clean Air Delivery Rate). It cleans 20 m² in only 6 min. (1)
3-layer filtration with NanoProtect HEPA, active carbon filter and pre-filter captures 99.97% of ultra-fine particles as small as 0.003 microns (4), so you are safe from PM2.5, bacteria, pollen, dust, dust-mite allergens, pet dander, gas and other pollutants (7). Certified by the European Centre for Allergy Research Foundation..
Captures aerosols including those which may contain respiratory viruses. Tested independently by airmid health-group to remove up to 99.9% of viruses and aerosols from the air (3). Also tested for coronavirus (5).
Your Philips Air Purifier or Humidifier needs to be reset after each filter replacement. This is done to activate the counting system for the new filter(s).
Also, your air purifier/humidifier is equipped with a filter replacement alert. It warns you when the filter needs to be cleaned (pre-filter only) and replaced.
If you do not reset the air purifier or humidifier after replacing a new filter, the appliance will alert you to replace a filter.
Your Philips Air Purifier gives you reassurance by displaying real-time indoor air quality codes. Discover what the codes mean.
Meanings of codes in Philips Air PurifiersDepending on the Air Purifier model you have, you might find one or more of the following indicators or codes:
Code: A
Auto mode
Code: C
Gas mode (AC3254 and AC3256 only)
Code: L
Child lock on
Code: UL
Child lock off
Code: F0
Clean the pre-filter
Code: A0 to A9
Replace NanoProtect S3 HEPA filter
Code C0 to C9:
Replace NanoProtect S3 AC filter
Code SL
Sleep Mode
Code 1h:
Timer mode
Code t:
Turbo Mode.
Error Code: Er
The hall sensor is not working properly. Remove and then reattach the front panel. If the error code “Er” still persists, we recommend you to contact us.
Error code: E1 to E4
The appliance has malfunctions. In this case, we recommend you to contact us.
The information on this page applies to the following models: AC2959/63, AC1758/63, AC3059/65.
