The new SpeedPro cordless vacuum cleaner FC6726 provides a fast clean, with powerful reach and runtime of up to 40 minutes. It's equipped with the 180° suction nozzle for precise dirt pick-up, even in the toughest spots - close to walls, furniture and in the corners.
Fast reach everywhere
Integrated handheld and brush accessory
Runtime of up to 40 mins
180 degree suction nozzle
Save Extra with 2 offers:
Additional 1 Year Warranty - 2+1* year additional warranty coverage exclusively for products puchased from this website | Check Warranty Policy | Check Warranty Policy
Buy Now, Pay Later- Easy EMI options let you have what you desire the most | Details on Checkout
LED Nozzle: Dust, fluff, hair and crumbs are easy to spot and capture due to the LED lights in the SpeedPro nozzle
Integrated Accessories: Accessories are simple to use with one click. The detachable handheld unit makes SpeedPro two devices in one. The brush attachment is integrated into the tube so it's always at hand to clean ceilings and shelves.
Fast Reach Everywhere: SpeedPro is flexible and easy to maneuver. The dust bucket is on top, which allows for a lower angle and even goes fully flat on the floor to reach under low furniture
Up to 40 minutes runtime: High performance 21.6V lithium ion batteries provide up to 40 minutes in normal mode and 20 minutes in turbo mode, before you recharge
PowerCyclone 7: PowerCyclone 7 technology immediately separates dust from air, to maintain strong performance for longer
PowerBlade Motor: PowerBlade motor is engineered for high air speed, to enable powerful, precise pick-up at nozzle level
Hygienic Emptying: The vacuum cleaner's dust bucket can be easily removed and emptied hygienically without causing any dust cloud
180 degree suction: 180° suction nozzle is designed for precise and powerful pick-up of up to 98% of dust and dirt in each stroke, on all floor types, even in those hard to reach spots
If the suction power of your Philips Vacuum Cleaner is not as good as expected, there can be several reasons. Discover how to simply solve this yourself in the following lines.
The dust bag or container is full
When the dust bag or container of your Philips Vacuum Cleaner is full, the suction power will be lower than usual.
In this case, check the dust bag/container, and if it is full, replace it (or empty if that is indicated for your specific vacuum model).
If you have a specific vacuum model with reusable bags, worn out bags should be replaced since this could also cause low suction power.
The hose, tube or nozzle is blocked
The hose, tube or nozzle of your Philips Vacuum Cleaner may become clogged or blocked. Also, the brush could be blocked by entangled hair. The suction power will become affected by this and the device might not be able to pick up dirt as expected since air cannot go through as easily as it should.
Check if any of these parts are blocked, and remove the blocking elements.
The filter is dirty
A dirty filter will prevent air from flowing as it should do under normal circumstances. This may decrease the suction power of your Philips Vacuum Cleaner. As a result, the device might not be cleaning well or as expected.
Depending on your vacuum model, it will have a motor protection filter and/or an exhaust filter.
When the motor protection filter is dirty:
Usually, the motor protection filter can be found behind the dust bag or dust container.
This filter should be cleaned every 4 to 6 weeks (depending on the model you have).
Also depending on the specific vacuum model, in some vacuums, this filter should be cleaned by tapping it over a bin/brushing the dust, and in other vacuums, it can be washed with water. Please check the indications for your specific model.
When the exhaust filter is dirty:
The exhaust filter is located at the back of your Philips Vacuum Cleaner, behind the motor.
This filter should not be washed or cleaned: it should be replaced once a year (unless the filter in your vacuum model is not replaceable)
The lid of the dust container has not been placed correctly
If your Philips Vacuum Cleaner comes with a dust container, please make sure the lid of the device is placed correctly.
The suction power setting is set too low
Some Philips Vacuum Cleaners come with a suction power setting.
This suction power setting contains similar icons to the ones shown in the image below. Usually, you should be able to find it located on the remote control, the handgrip or the vacuum itself.
If the device comes with this setting, check if it is set to the desired suction power. If it is not, you can increase the level.
Did these steps not solve the issue? Please contact us for further assistance.