Philips 3 Jar Juicer Mixer Grinder with 600W - HL7578/00

The appliance is equipped with an ‘Overload Protector’ (OLP) Switch

If the overload protector switch is activated, the appliance will cut off the power supply. This may happen if the appliance is run continuously for a very long time or if it is overloaded with ingredients.

To reset the appliance:

1. Unplug the appliance.

2. Remove the jar and look under the appliance.

3. On the bottom of the basic unit you see a red switch (OLP). Press the switch to reset the appliance.

4. Let the appliance cool for 2-3 minutes.

5. Reassemble the appliance, plug it back in and switch it on.

1. The appliance may produce some smoke when you use it for the first time. It is normal for a new product to produce an unpleasant smell or emit some smoke when it is first used. This phenomenon stops after you have used the appliance a few times.

2. The appliance may have been running for too long./

Switch off and unplug the appliance immediately

Let the appliance cool down for 60 minutes

Plug the appliance in again and switch the appliance on again

If the problem persists, please contact your local Philips dealer or an authorized Philips service centre.

1) You can clean the appliance by wiping the basic unit with a damp cloth and a non-abrasive liquid cleaner.

2) To clean the jars, follow the instructions given below:

Fill the jar with soapy water

Assemble the jar on the basic unit

Use the ‘WHIP’ button 5-6 times

Wash the jar with clean water

Make sure that you dry the jar and lid completely using a towel before you store it

3) You can clean the other attachments like the spatula and removable blades, with your dishes using soapy water.

It is recommended to use the below method to get best results of Juicing.

- Use speed 1

- It helps to give maximum juicing performance on soft products

- Helps to maintain the Juice taste on citrus fruits